Soft, warm light wrapped in minimalist geometry. This cube lamp brings a quiet, modern presence to desks, reading nooks, and studio corners. Printed on matte-coated 210μ polyester film, the slightly weathered off-white panels showcase a bold circular emblem in muted black and charcoal tones, giving the piece an industrial, tech-inspired edge without feeling cold. Switch between a plug-in desk or floor lamp setup and a pendant installation for overhead glow. The result is low-key ambient lighting that fades hard edges in a room and creates a calm, contemplative atmosphere — great for late-night work sessions, creative studios, or a relaxed living space where subtle design speaks loudest.
Product features
- Two sizes: 11.7" × 11.5" × 11.5" and 7.7" × 7.6" × 7.6"
- Printed 210μ polyester film with matte-coated finish on one side
- Two cord options: standard plug-in (US or EU plug included) or pendant (no plug)
- Use recommended LED/CFL bulbs only (10W for large, 6W for small); bulb not included
- Made in Latvia from globally sourced parts; not waterproof and not suitable for unsupervised children
Care instructions
- The lamp comes inside of the box with the shade packed upside down. When you remove it from the box (following the instructions printed on the inner flaps), you remove the plastic ring, remove the shade, turn the shade right side up and then secure it to the socket with the plastic ring again.
- Wipe the dust off gently with a soft, dry cloth.
EU representative: Aquilae Nido, Johan Cruijff Boulevard 65-71, Amsterdam, Noord Holland, 1101 DL, NL
Product information: Generic brand.
Warnings, Hazard: Children should be monitored to ensure they do not play with the lamp. The lamp is not waterproof. Use only with the specified voltage. Always unplug when not in use. If the cord is damaged, stop use immediately. Unplug before assembly or cleaning., Made in Latvia from globally sourced parts, Not suitable for children
Care instructions: The lamp comes inside of the box with the shade packed upside down. When you remove it from the box (following the instructions printed on the inner flaps), you remove the plastic ring, remove the shade, turn the shade right side up and then secure it to the socket with the plastic ring again., Wipe the dust off gently with a soft, dry cloth.
