Soft, warm light shaped into a friendly cube. This lightweight polyester lamp slips into a modern nursery, creative studio, or cozy reading nook and gives a calming, ambient glow. The printed panels show a bold, glossy yellow letter motif on a creamy background — playful without being garish. Choose the larger cube for floor- or desk-placement with a standard plug and switch, or the smaller size as a pendant when installed by an electrician. The matte-coated finish softens the light and mutes reflections so the room fills with a gentle, restful tone. Because it’s thin and flexible, the shade packs flat for shipping yet snaps into a crisp, geometric shape when assembled. Use with a low‑watt LED or CFL bulb (recommended wattages listed) to keep the light cool and long‑lasting.
Product features
- Two sizes: ~11.7" and ~7.7" cube options
- 210μ polyester film with matte-coated finish on one side
- Choice of standard cord with plug (US A or EU C) or pendant cord (no plug)
- Requires LED/CFL bulb (10W for large, 6W for small); bulb not included
- Lightweight, flat‑pack construction; made in Latvia from globally sourced parts
Care instructions
- The lamp comes inside of the box with the shade packed upside down. When you remove it from the box (following the instructions printed on the inner flaps), you remove the plastic ring, remove the shade, turn the shade right side up and then secure it to the socket with the plastic ring again.
- Wipe the dust off gently with a soft, dry cloth.
EU representative: Aquilae Nido, Johan Cruijff Boulevard 65-71, Amsterdam, Noord Holland, 1101 DL, NL
Product information: Generic brand.
Warnings, Hazard: Children should be monitored to ensure they do not play with the lamp. The lamp is not waterproof. Use only with the specified voltage. Always unplug when not in use. If the cord is damaged, stop use immediately. Unplug before assembly or cleaning., Made in Latvia from globally sourced parts, Not suitable for children
Care instructions: The lamp comes inside of the box with the shade packed upside down. When you remove it from the box (following the instructions printed on the inner flaps), you remove the plastic ring, remove the shade, turn the shade right side up and then secure it to the socket with the plastic ring again., Wipe the dust off gently with a soft, dry cloth.
